Peter Bausch Easy Pedipeel Gebrauchsanweisung Seite 10

2. Wash and clean your skin and dry it.
Attention: Never use the device on turn, ripped or bleeding skin.
3. Be sure that the turning grinding head attachment (A) is inserted correctly and engaged.
To do this, press the release button (C) while pushing the attachment in and release it as
soon as the attachment is firmly inserted.
4. Circle the EasyPedipeel over the affected areas for 2-3 seconds. Do not press too firmly;
otherwise you might dislike the feeling and the device will stop! Repeat this step until you
have reached the softness you want to achieve.
Attention: Never circle over the same area longer than 2-3 seconds! Stop the process if
your skin gets too thin or hot!
5. Turn off the device after finishing your pedicure.
6. Clean your skin from all remaining skin particles and use enriched foot lotion for soft and
healthy feet.
EXCHANGE OF THE ATTACHMENTS
The turning grinding heads are interchangeable and can be exchanged on demand.
1. The device has to be turned off.
2. Push the release button (C) on the side of the EasyPedipeel and remove the grinding head
(A) easily.
3. Attach another grinding head to the device. Make sure that the attachment is fully
engaged. This is just possible if installed properly! To do this, press the release button
(C) while pushing the attachment in and release it as soon as the attachment is firmly
inserted.
4. Tip: Do not turn on the device if there is no attachment attached to it!