Aimetis E3200 Serie Handbuch Seite 7

Step 2: Connect the E3200 PSA to the Network
Note the following points:
1. This is a setup procedure to configure basic system settings such as a computer name, IP
address, time and time zone. Video management settings will be configured by
Client.
2. Initial setup does NOT require a monitor, keyboard or mouse to be attached to the
. The
PSA VGA
3. The
E3200 PSA
Using LAN1 or LAN1 & LAN2
The may be connected to a single network containing IP cameras and client computers. You
E3200 PSA
may use either the
LAN1
is used.
LAN1
and ports are for troubleshooting only.
DVI-D
will be configured using your Web browser once connected to your network.
or the ports on the back panel. For convenience this guide will assume
LAN2
Figure 4: One network in use
5
Symphony
E3200
Connect the E3200 PSA to the Network