Safety; Periodic Maintenance; Extraordinary Maintenance - TCE NEOS Serie Kurzanleitung Zur Installation

TCE Group S.r.l.
MAINTENANCE

Safety

In system maintenance operations it is necessary to provide for the use of personal protective equipment (PPE) such as:
- Clothing:
In compliance with the essential safety requirements in force in the workplace in which it will be used.
- Gloves:
Operating in areas with loads, moving mechanical parts, live parts and parts that can reach high temperatures, it is
necessary to use CE marked gloves as PPE that protect against all the risks just analyzed.
- Safety shoes with non-slip sole:
They are necessary in all works where there is a risk of a piece falling.
- Safety goggles:
They are necessary in all works where there is a danger that an object, material, liquids, can be thrown into the eyes of
an operator.
Maintenance operations must be carried out by personnel who have previously read the manual.
Any type of cleaning or physical maintenance must always be carried out with the device switched off and disconnected from the
power supply. When carrying out these operations, strictly follow the instructions given in this manual.
DANGER
DISCONNECT THE DEVICE FROM THE POWER SOURCE BEFORE PERFORMING ANY CLEANING OR
PHYSICAL MAINTENANCE.
The lighting system (natural and/or artificial) of the area where maintenance operations are carried out must ensure the following
minimum illuminance values: 200 lux. For any maintenance and cleaning operations, in addition to the instructions contained in
this manual, the general safety standards and, if necessary, the general safety standards at work in force in the place where these
operations are carried out must be observed.

Periodic maintenance

It is necessary to periodically clean the device, in particular to check that the fan blades and the cooling fins, from any accumulation
of dust and dirt, which may have formed on the external surface (operation that involves removing the fan cover). If necessary,
use a compressor to blow the dust. You can also use a non-abrasive damp cloth that is free of alcohol or aggressive solvents. Do
not use abrasive sponges, chemical solvents or detergents. During cleaning, avoid water touching internal electrical parts of the
device.

Extraordinary Maintenance

Extraordinary maintenance is required in case of failures or breakages, unforeseeable accidents or inappropriate use of the device.
The situations that can arise from time to time are completely unpredictable and therefore it is not possible to describe
appropriate intervention procedures.
If necessary, consult the manufacturer's service center to receive the appropriate instructions for the situation.
All interventions, mechanical, electrical and electronic, ordinary or extraordinary, must in any case be carried out by
specialized and authorized personnel or by our service center personnel
Installation, use and maintenance manual – Serie NEOS
27