Operation Method - BabyOno HONEY Bedienungsanleitung

OPERATION METHOD

Preparation before use
1. First put the upper cover basket into the inner tank of the product,
and then put the milk bottles need to be heated, keeping-warm milk
bottle, food cans into the upper cover basket. If heating the milk
storage bag, please do not put the top cover basket into the inner tank
of the product, just heat the milk storage bag directly into the inner
tank of the product.(Photo 7)
2. Add water into the bottle warmer, the water level is slightly higher
than the water level in the bottle, or add water to the top of the bottle
warmer around 1-2cm below. (Photo 8); If put canned food into the
bottle warmer, add water, the height of the water lever is about 1 cm
below the mouth of the baby food cup. If the baby food cup is exposed
outside bottle warmer, add water to the top of the bottle warmer
below 1-2cm. (Photo 9).
Important! Use pre-boiled/demineralised water, as it prevents
lamescale build-up on the heating chamber. The presence of lamescale
on the heating chamber is not subject to complaint.
WARMING
1. Put the bottle warmer in a horizontal position. Do not tilt. Just put
the bottle with water or with milk into the container. Add appropriate
water into the container.
Notice: When using the defrost function, do not put the top cover
basket into the inner tank of the product, just put the frozen solid milk
storage bag into the inner tank of the product for defrosting directly.
4
2. Connect with the power, press the key
pressing key. Each mode start with default setting temperature
and working time (table below). If you want to adjust the temperature,
you can press / to adjust it. Short press
to increase or reduce the temperature by 1°C. Long press
temperature increases or decreases rapidly. Each mode have adjustment
range (If the temperature is set over the current mode range it will
automatically change to higher temp. mode).
3. When the milk temperature reaches the specific temperature, the
current indicator will stop flashing with sound alert and the machine
will be status of heat preservation. (Please testing the temperature
before feeding).
FOOD DEFAULT
MODE
TYPE TEMPERATURE
Natural frozen
40°C
milk in storage
bags
Natural milk
40°C
in bottle
Milk formula
50°C
in bottle
Baby
70°C
food jars
Empty
100°C
bottles
and jars
STERILIZE
Before use, please make sure that the bottle warmer is clean and
sanitary,
Add 70ml water into the container, put the bottle (bottle mouth upside
down), put pacifier and components into the container, cover the upper
cover basket. (Photo 10)
Connect with the power, press the key
function of disinfection. The default setting temperature is 100°C . After
sterilization, the machine will be ready mode automatically. (After
disinfection, the internal temperature is very high, please use it after
cool. If removing the top cover basket, please take the edge of top cover
basket carefully in case scald.)
, then select function by
/
/ the
DEFAULT
ADJUSTMENT
WORKING
RANGE
TIME
37-44°C 35 min
12 min
37-44°C
45-69°C 12 min
12 min
70-90°C
2 min
then press , select