eQ-3 HomeMatic HmIP-FAL230-C10 Installations- Und Bedienungsanleitung Seite 54

Start-up
Incorrect installation can put
• your own life at risk;
• and the lives of other users of the electrical sys-
tem.
Incorrect installation also means that you are running the
risk of serious damage to property, e.g. because of a fire.
You may be personally liable in the event of injuries or
damage to property.
Contact an electrical installer!
*Specialist knowledge required for installation:
The following specialist knowledge is particularly important during
installation:
• The "5 safety rules" to be used: Disconnect from mains;
Safeguard from switching on again; Check that system is
deenergised; Earth and short circuit; Cover or cordon off
neighbouring live parts;
• Select suitable tool, measuring equipment and, if neces-
sary, personal safety equipment;
• Evaluation of measuring results;
• Selection of electrical installation material for safeguarding
shut-off conditions;
• IP protection types;
• Installation of electrical installation material;
• Type of supply network (TN system, IT system, TT system)
and the resulting connecting conditions (classical zero
balancing, protective earthing, required additional meas-
ures etc.).
For installing the floor heating actuator into a
power distribution panel it has to be mounted in
accordance with VDE 0603, DIN 43871 (low-volt-
54