eQ-3 HomeMatic HmIP-FAL230-C10 Installations- Und Bedienungsanleitung Seite 49

Hazard information
out work on the 230 V mains. Applicable accident
prevention regulations must be complied with
whilst such work is being carried out. To avoid
electric shocks from the device, please disconnect
the mains voltage (trip the miniature circuit-break-
er). Noncompliance with the installation instruc-
tions can cause fire or introduce other hazards.
When connecting to the device terminals, take
the permissible cables and cable cross sections
into account.
Please take the technical data (in particular the
maximum permissible effective installed load of
the floor heating actuator and the type of load to
be connected) into account before connecting a
load! All load data relates to ohmic loads. Do not
exceed the capacity specified for the device.
The device has not been designed to support
safety disconnection.
Exceeding this capacity could lead to the
destruction of the device, fires or electric shocks.
Before the actuator is connected, remove the
fuse from the fuse box or remove the plug from
the socket.
49