Ilda Signal; Technical Specifications; Please Note - Laserworld CS-250 G Bedienungsanleitung

Manual / Bedienungsanleitung: CS-250 G, CS-400 G

ILDA signal

Pin out of the standard ILDA signal:
1 Scanner X+
2 Scanner Y+
3 Intensity/Blanking+
4 Interlock A
5 Red+
6 Green+
7 Blue+
8 – 12 Not used
13 Shutter +5V, max. 20 mA

Technical specifications

 Power supply: AC 85V-250V, 50/60 Hz
 Ambient temperature: +10°C ... +35°C
 Power consumption: 50 W
 Operation modes: DMX 512, automatic, music mode, ILDA
 Lasersources: aircooled DPSS laser
 Optical power (at the laser):
 Beam: ca. 3mm/1mrad
 Laser class: 3b
 Scanning system: Galvo system, 25.000 PPS at 4°
 Scanangle: max 40°

Weight: 4.5 kg

Dimensions: 23 x 24 x 13 cm (W x D x H)
 Loudness: <70db

Please note

This device has left our premises in absolutely perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this user manual. Laserworld cannot be made liable for damages caused by incorrect
installations and unskilled operation!
This manual is subject to changes without notification, errors and omissions expected. Contact your local dealer
for an update, or check our website www.laserworld.com
For service contact your dealer or Laserworld.
-10V..+10V
-10V..+10V
0V..+2.5V
0..2.5V
0..2.5V
0..2.5V
CS-250 G: max 250mW; >175mW 532nm green
CS-400 G: max 400mW; >300mW 532nm green
14 X-
15 Y-
16 Intensity/Blanking-
17 Interlock B
18 Red-
19 Green-
20 Blue-
23-24 Not used
25 GND Signal ground
5 / 10
+10V..-10V
+10V..-10V
0..-2.5V
0..-2.5V
0..2.5V
0..-2.5V
Version Jun-13