Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Example recording: 10 readings every minute in room 1 on PC1 called
Measurements (so the total recording time is 10 minutes). Minimum temperature of
24°C and maximum temperature of 30°C. Minimum humidity 42% and maximum 50%.
A CO2 level of 1200 ppm.
Set Param
→
Total Records: "10"
"30°C" → Humidity Low: "42%" → Humidity High: "50%" → CO2: "1200 ppm".
Important: The "address" field must be numerical.
Make sure the alarm is enabled. The minimum and maximum values for temperature
and humidity are used as reference thresholds for the chart. As indicated in step 2 of
the instructions, the alarm is only available when the set CO2 value is exceeded.
IMPORTANT: Do not perform any operations on the software during recording or it will
stop. Recording stops automatically at the end of the time required for the
measurements.
Step 7: When the time has finished, click "Data Download" to save the data recording.
Click OK when the message appears. Save the file (in .HTRec format) on the PC. The
chart for the data is displayed.
Selection of chart
values to be
displayed (CO2,
temperature and
humidity).
→
→
Address: "1"
Serial Number: "PC1"
→
Interval: "1 min" → Temp. Low: "24°C" → Temp High
Table of values of 10 measurements at a 1 minute
AIC International - 44980 Ste Luce sur Loire - France
interval
Imported by:
→
Test name: "Measurements"
Reminder of settings.
Werbung
