Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Step 6: Recording data: Make sure the meter is on. It must be switched on (ON) to
be able to record data. Double click on the icon for the software to open it (from the
desktop shortcut or the list of programmes).
Reconnect the CO2 meter to the PC (with the USB cable supplied).
Click on the "Connect" button, the
"Communication/ Connect" menu: the CO2 meter is automatically recognised.
Set the parameters of the data to be recorded before starting to record.
-
6.1 Click on "Set param" or communication/Set Parameters. A window
opens.
-
6.2 Complete the Address (numerical)
Serial number and Test Name fields.
-
6.3 Indicate the total number of readings to be recorded (Total Records) and
the time interval between each reading (Interval). Select the interval unit in
seconds (Sec), minutes (Min) or hour (Hours). The total recording time is
automatically calculated and displayed under "Interval".
6.4 In the "Temperature Unit" tab, select Celsius or Fahrenheit.
-
6.5 In the "Temperature Alarm" tab, indicate the minimum (low) and maximum
-
(High) temperature threshold.
6.6 In the "Humidity Alarm" tab, indicate the minimum (low) and maximum
-
(High) humidity threshold.
-
6.7 In the "CO2 Alarm" tab, indicate the CO2 concentration at which the alarm
will sound. If a different threshold has been determined manually in step 3, this
will be replaced by the new value entered with the software.
-
6.8 Select "Immediate". Then click "OK".
-
6.9 Confirm by clicking "OK" in the last window which indicates that recording
has started (The meter is recording data).
-
"REC" flashes on the meter display, above and to the left of the temperature
reading. The interval of the flashing corresponds to the time interval set in the
previous step (6.3).
-
The computer monitor then displays a green screen with the values currently
measured and a summary of the settings selected for the recording (on the
right). The threshold values not respected are displayed in black on the green
screen (e.g.: if the threshold set for the CO2 is 1200 ppm and the measurement
recorded is higher, the threshold of 1200 ppm is highlighted in black).
Imported by:
AIC International - 44980 Ste Luce sur Loire - France
icon located at the top left or in the
Werbung
