Zeroing The Elevation And Windage Dial For K16I; Zero Point Adjustment For K16I - KAHLES K16i Bedienungsanleitung

Sight in the rifle scope (on the shooting range) to your
specific distance and desired point of impact by turning the
elevation and windage adjustments to move the bullet
impact to your desired point of impact. The direction of bullet
impact is engraved on each adjustment.
Once you have established the preferred point of impact on
the target you will need to zero the elevation and windage
adjustments.
Expert mounting is required to ensure optimum perfor-
mance.

6.1 Zeroing the elevation and windage dial for K16i

If the point of impact of the bullet deviates from the aiming
point, this can be easily and precisely corrected by adjusting
the elevation and the windage turret of the rifle scope. To
E
Symbol picture
Pay attention, never use any strong force when you do any adjust-
ments on the turrets.
6.1a Zero Point adjustment
Once you have aligned the scope to the rifle, you can retain
this basic setting. The scale for this is located on the index
disc of the elevation/windage adjustment turret.
1. Hold the turret with your fingers
2. Use a coin or an empty cartridge case and turn the locking
screw (1) in counter clockwise direction
20
make adjustments, simply
1
un screw the screw-on caps of
2
3
the elevation and windage
turrets.
The aim point correction per
click can be taken from the
information engraved on the
elevation or windage adjust-
ment turret of your rifle
scope.
K AHLES –
Never miss THE MOMENT!