Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating instructions
Studio microphone
Item no. 1407924
Intended use
The microphone is intended for converting acoustic signals (sound waves) into electric signals.
The low level audio output signal must only be connected to suitable microphone inputs on audio
devices. The microphone must only be connected to an audio device supplying phantom power.
The connection is facilitated via XLR cable (not included).
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms,
must be avoided under all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you
use the product for purposes other than those described above, the product may be damaged. In
addition, improper use can cause hazards such as short circuiting, fire, electric shock etc. Read
the instructions carefully and keep them for future reference. Make this product available to third
parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names
and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Studio microphone
• Microphone holder
• Operating instructions
Up-to-date Operating instructions:
1. Open www.conrad.com/downloads in a browser or scan the
displayed QR code.
2. Select document type and language and enter the item number
into the search field. After submitting the query you can download
displayed records.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on proper
handling in theses operating instructions, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
• Do not direct the microphone at the speakers. This will cause acoustic feedback that
could damage both the speakers and the microphone.
• In order to avoid distortions or mismatching, which could damage the microphone
or any audio device connected, the product must only be connected to suitable
microphone inputs. Also refer to the connection values under technical data in
regard to this matter.
• Only use a suitable, shielded microphone cable for connecting the microphone.
Using other cables could cause interferences.
• The product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed if
the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
• Consult a professional if you require assistance with product operation, safety or
connection.
• Maintenance work, adjustments and repairs may be carried out only by a
professional or at a specialist workshop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Operation
a) Attaching the holder
• Attach the holder to the bottom of the microphone and secure it with the nut.
• Screw the holder on a suitable microphone stand.
• Loosen the knob on the side of the holder.
• Tilt the microphone to the desired position and then tighten the knob again.
b) Connection
• Turn off the audio device to which to connect the microphone.
• Connect the microphone to the audio device using an XLR cable.
• Reduce the volume on the audio device.
• Turn on the audio device and activate the phantom power.
• Adjust the volume and, if necessary, also the sensitivity of the audio device.
• Turn off the audio device after use. Disconnect the microphone from the audio device.
Maintenance and cleaning
• This product does not require maintenance. There are no components located inside the product
you need to maintain. Never open/dismantle the product. Have maintenance and repairs done
by qualified experts or repair shops only.
• Disconnect the product from the audio device before cleaning.
• To clean the product, a dry, soft and clean cloth is sufficient. You can use a long-haired, soft and
clean brush to remove dust.
• Never use any aggressive cleaning agents or chemical solutions as they may cause damage to
the housing or the product to malfunction.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household
waste.
At the end of its service life, dispose of the product in accordance with applicable
regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the
environment.
Technical data
Power supply .......................................... 48 V phantom power
Converter type ........................................ Back electret condenser
Directivity ................................................ Cardioid
Frequency response . ............................. 30 – 18000 Hz
Output impedance.................................. 150 Ω ±30 % (@ 1 kHz)
Sound pressure level............................. max. 134 dB (@ 1 kHz = 1 % T.H.D.)
Signal-to-noise ratio . ............................. 75 dB
Sensitivity ................................................ -38 dB ±3 dB (0 dB=1 V/Pa @ 1 kHz)
Thread Ø .................................................. 15.9 mm (5/8")
Operating conditions ............................ -20 to +60 °C, 0 – 85 % RH
Storage conditions................................. -25 to +70 °C, 0 – 85 % RH
Dimensions (Ø x H)................................. 53 x 170 mm
Weight . ..................................................... 261 g
Frequency response
-20
-30
-40
-50
-60
20
50
100
200
500
Directivity
0
0
330
30
300
60
270
90
240
120
150
210
180
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represents the
technical status at the time of printing.
© Copyright 2016 by Conrad Electronic SE.
1K
2K
5K
10K
20KHz
V1_0116_02-ETS-Mkd
Werbung
