Declaration Of Incorporation - Hettich Mosys Bedienungsanleitung

2 Declaration of Incorporation

In accordance with Appendix II, Part 1, Section B of Directive 2006/42/EC by the European
Parliament and the European Council from 17.05.2006 on machines and concerning the
revision of Directive 95/16/EC (revised version) –
on behalf of the company
Hettich Franke GmbH & Co. KG
the signatory declares:
The Mosys electromechanical drive unit for electrically adjustable slatted frames serves the
purpose of adjusting the head and/or foot section.
The type designation is: Mosys
Within the scope of the conformity assessment, the required specific technical documents
have been prepared and lodged. Upon reasonable request, the specific technical documents
can be provided to the national authorities in paper or electronic form. The specific technical
documents can be requested from:
Steffen Rumler, Hettich Franke GmbH & Co. KG, 72336 Balingen
_________________________________________________________
(name, address)
The product also complies with the following European Directives:
Machinery Directive 2006/42/EC
RoHs Directive 2011/65/EG
EMC Directive 2004/108/EC
R&TTE Directive 1999/5/EC
The following harmonised standards were applied:
EN 55014-1:2006+A1:2009+A2:2011
EN 55014-2:1997+A1:2001+A2:2008
EN 61000-3-2
EN 61000-3-3
EN 60335-1:2012
EN 62233:2008
EN 300 220-2 V2.3.1EN 301 489-1 V1.9.2EN 301 489-3 V1.4.1EN 50371:2002
EN 62479:2010EN 60950-1:2006
This EC declaration loses its validity if the product is converted or modified without the
respective authorisation.
Note: The incomplete Mosys type machine can only be started up after it has been
determined that the machine, in which the "Mosys" is to be installed, is in accordance with
the regulations of the Machinery Directive.
72336 Balingen, date 1.07.2019
______________________________
______________________________
General Manager, Steffen Rumler
13