Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating Instructions
Stand for Amazon Echo
Item No. 1620630
Intended Use
This stand comes equipped with rubber pads to absorb vibrations from the speaker, prevent slipping and
protect sensitive surfaces against getting scratched. The wide base also helps prevent the device from
tipping over. An open design offers clear access to ports and controls without blocking the microphone and
sound from the speakers.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product
for purposes other than those described above, the product may be damaged. In addition, improper use
can result in short circuits, fires, electric shocks or other hazards. Read the instructions carefully and store
them in a safe place. Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements.
All company names and product names are trademarks of their respective owners. All rights reserved.
Delivery Content
• Stand
• 5 x long screws (1x spare)
• 5 x short screws (1x spare)
• Cross-head screwdriver
• Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the
QR code shown. Follow the instructions on the website.
Explanation of Symbols
The symbol with the exclamation mark in the triangle is used to indicate important information in
these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety Instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous playing
material for children.
• Protect the appliance from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, steam and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it
from any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
• Consult an expert when in doubt about the operation, safety or connection of the appliance.
• Maintenance, modifications and repairs must only be completed by a technician or an
authorised repair centre.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
Operating Elements
1
2
3
1
Short screws
2
Top plate
3
Mounting posts (long)
4
Mid-plate
4
5
Mounting posts (short)
6
Base plate
5
7
Rubber device pad
6
7
8
Long screws
9
Rubber base pad
8
9
Getting Started
Two extra screws (1 long / 1 short) are included as spares. Keep these in a safe location.
• Step 1-5: Use the long screws (1).
• Step 6-7: Use the short screws (8).
Do not overtighten screws (1) (8) and mounting posts (3) (5) as this may cause damage. The
rubber base pad (9) can leave marks on sensitive surfaces.
1
3
5
7
Care and Cleaning
• Remove the device from the stand before each cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as they can cause
damage to the product.
• Clean the product with a dry, fibre-free cloth.
Disposal
At the end of its service life, dispose of the product in accordance with applicable regulatory
guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
Technical Data
Material ................................................. AS (acrylonitrile-styrene copolymer)
Operating / storage conditions .............. 0 to +40 °C, 10 – 90 % relative humidity
Dimensions (Ø x H) .............................. 140 x 159 mm
Weight .................................................. 262 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2018 by Conrad Electronic SE.
2
4
6
8
*1620630_v1_0118_02_fl01_m(1)_4L
Werbung
