Operation Instruction - Peraqua 7300704 Installations- Und Benutzerhandbuch

VI. Operation instruction
Picture for keys
SYMBOL
Note:
You may set the desired water temperature from 12 to 40℃.

The center of the screen shows the inlet pool temperature, when the

up and down keys are pressed, the digital flashing displays the set
temperature.
After you turn on the heat pump, the fan will start to run in 3

minutes. In another 30 seconds, the compressor will start to run.
During heating, the

be light. During auto heating cooling,
DESIGNATION
Power ON/OFF
Mode
Heat/Cool/Auto
Up/ Down
will be light. During cooling,
OPERATION
Press to power on or off the heat pump
Press to select Smart/Silence mode
Smart mode:100%-20% capacity
Silence mode:80%-20% capacity
Press to shift among cooling, heating and auto
Press to set desired water temperature
10
and will be both
will