Installation Instruction - Peraqua 7300704 Installations- Und Benutzerhandbuch

V. Installation instruction
1. Drawing for water pipes connection
(Notice：The drawing is just for demonstration, and layout of the pipes is only for reference.)
2. Connecting your power wire
(Note: please open the back panel for power connection. The operation is the same as above.)
① Please use cross screwdriver to take off the 2 screws
at the bottom of the right side panel. Take off the lower
half of the panel.
② Unscrew the 3 screws on the cover of the electrical box.
③ Connect the terminals according to the electrical diagram.
6