Glow Fire Schiller Aufbauanleitung Seite 14

• In the next step, the black back wall (board 12) is used.
• Then screw the black ceiling plate 6 with the 4 black screws.
• The element 7 is available in two versions, each with a differently sized cutout.
Choose the right one for your water vapor cassette.
• You can now carefully insert the water vapor cassette into the recess. Due to the
structural properties of the fireplace insert in relation to the screws inserted on the
side, slight damage to the edge of the element 8 cannot be ruled out. This has no
influence on the optics and the function. Lack of lacquer, which occurs when
inserting the cassette, is thus excluded from any liability.
• Please note the further information regarding the operation of the water vapor
cassette.
Aufbauanleitung Glow Fire Schiller
5.Step
Stand: 08/2020
V.1.2