Specifications - Expert Ld60 Bedienungsanleitung

BATTERY VOLTAGE
CELL LOW VOL
BATTERY VOLTAGE
CELL HIGH VOL
BATTERY VOL ERR
CELL CONNECT
TEMP OVER ERR
CONTROL FAILURE
Battery Pack
1: ---mΩ 2: ---mΩ
3: ---mΩ 4: ---mΩ

13. Specifications

Operating voltage range:
Circuit Power:..............................max. 60W for charging ( L D 60)
Charge current range:...................0.1 ~ 6.0A ( L D 60)
Discharge current range:...............0.1 ~ 2.0A
Current drain for balancing LiPo:....300mA/cell
Battery type/Cell number:..............Ni M H /NiCd: 6-8S
Weight:........................................302g
Dimensions:.................................115x112x55mm
Voltage of one cell in the battery is too low, please
check the voltage of each cell.
Voltage of one cell in the battery pack is too high,
please check the voltage of each cell
Wrong connection of the connector detected, please
check the connector and cable.
The internal temperature of the unit goes too high.
Cool down the unit.
The processor cannot control the feeding current,
please repair it
IR
0mΩ
The battery balance port or the power line to the
connector is incorrect.
................ A C 100-240Volt
.
max. 100W for charging ( L D 100)
max. 10W for discharging
0.1 ~ 10.0A ( L D 100)
LiPo/LiFe/LiHv/LiIo: 2-4S
Pb: 6V(3P) - 12V (6P)
-18-
.