Activating/Deactivating Bluetooth - Beurer WL 50 Gebrauchsanweisung

7.8 Activating/deactivating Bluetooth

To play your own music on the wake up light via Bluetooth
To activate Bluetooth
1. Press the Mode button. BLUE appears in the display, and
2. The wake up light can now be connected with other devices (e.g. smartphone) via Blue-
tooth . Once a device is connected to the wake up light via Bluetooth
®
will sound on the wake up light, and the Bluetooth
has been disconnected, the acoustic signal on the wake up light will sound again and the
Bluetooth symbol
®
3. To deactivate Bluetooth
pears in the display. The Bluetooth
4. To switch between individual songs stored on the connected device on the wake up light,
briefly press the
5. To set the volume on the wake up light, press and hold the
( U 0-30 ).
6. Press the Mode button to exit Bluetooth
on the wake up light, proceed as follows:
®
goes out.
on the wake up light, press the Mode button until the time ap-
®
symbol
®
or button.
®
, you must first activate Bluetooth
®
symbol
®
goes out.
mode again.
®
47
starts to flash.
, an acoustic signal
®
will light up. If Bluetooth
or the
.
®
®
button