Cleaning; Cleaning Schedule; Clean The Body Of The Appliance; Clean The Air Quality Sensor - Philips AC4080 Benutzerhandbuch

5

Cleaning

Note
•
Always unplug the appliance before you clean it.
•
Never immerse the appliance in water or any
other liquid.
•
Never use abrasive, aggressive, or flammable
cleaning agents such as bleach or alcohol to
clean any part of the appliance.
•
Only the pre-filter and humidification filter are
washable. The air purifier filter is not washable
nor vacuum cleanable.

Cleaning schedule

Frequency
When
necessary
Every week
When the
filter replace
indicator
lights up
Every two
months
Clean the body of the
appliance
Regularly clean the inside and outside of the
appliance to prevent dust from collecting.
1
Wipe away dust with a soft dry cloth from
the body of the appliance.
2
Clean the air inlet and the air outlet with a
soft dry cloth.
Downloaded from www.Manualslib.com
Cleaning method
Wipe the surface of the
appliance with a soft dry
cloth.
Rinse the humidification filter.
Rinse the water tank.
Clean the pre-filter.
Descale the humidification
/
filter with the vinegar-water
mixture.

Clean the air quality sensor

and air humidity sensor with a
dry cotton swab.
manuals search engine
Clean the air quality sensor
Clean the air quality sensor every two months
for optimal functioning of the appliance. Clean
it more frequently if you use the appliance in a
dusty environment.
Note
•
When the humidity level in the room is very
high, it is possible that condensation develops on
the air quality sensor. As a result, the air quality
light may indicate that the air quality is bad even
though the air quality is good. In this case you
have to clean the air quality sensor or use one of
the manual speed settings.
1
Clean the inlet and outlet of the air quality
sensor with a soft brush.
2
Remove the cover of the air quality sensor.
EN 17