Change The Fan Speed - Philips AC4080 Benutzerhandbuch

3
Press and hold the fan speed button
and humidifier button
for 3 seconds.
» One or more fan speed lights flash to
Fan speed light
+
4
Press the fan speed button
sensitivity level of the air quality sensor.
5
Press and hold
the setting and switch off the appliance.
Downloaded from www.Manualslib.com
simultaneously
show the current sensitivity level of the
air quality sensor.
3"
Sensitivity level
standard
sensitive
extra sensitive
to adjust the
for 2 seconds to save
manuals search engine
Note
•
When you are changing the sensitivity level, if
you do not change any settings, or if you do not
press for 2 seconds after you have changed any
settings, the appliance will resume normal work
without saving any changes.
•
After the sensitivity is changed and saved, the
appliance automatically starts operating at the
preset sensitivity level whenever you switch on
the appliance.
Change the fan speed
AUTO
In AUTO mode, the appliance selects the
appropriate fan speed in accordance with the
ambient air quality.
• Press the fan speed button
AUTO mode.
AUTO and one of the fan speed indicators
•
light up
( , or ) .
Note
• In AUTO mode, when the air quality reaches
the target (air purification only mode), or when
the air quality and humidity reach the target
simultaneously (combi mode), the appliance will
work with a lower fan speed, and the fan speed
indicator ( , or ) goes out.
to select
EN 13