Warranty - Team Orion Advantage ONE 406 Bedienungsanleitung

 Connect the battery to the charger using the charge
lead connectors.
 Connect the balancing plug to the appropriate balance
port
 Press the ENTER key until the fans start spinning, the
charge has started.
 Once the charge is completed, press ENTER to display
the final charge data.
 Press ENTER to return to the main screen.
 Disconnect the battery.
Note: you can stop the charge process at any time by
pressing the ENTER/STOP key. In LiPo/LiFe mode, you
can press the SET key to display individual cell voltage.
STORING THE BATTERIES
We recommend storing the batteries about 50% charged,
not full or empty. To achieve this when the battery is empty,
you can start a charge cycle and stop the charge when the
mAh counter reaches about 50% of the battery capacity.
6 - English

WARRANTY

Team Orion guarantees this product to be free from
manufacturing and workmanship defects. The warranty
does not cover incorrect installation, components worn by
use, or any other problem resulting from incorrect use or
handling of the product. No liability will be accepted for any
damage resulting from the use of this product. By the act
of connecting and operating this product, the user accepts
all resulting liability.
Is considered incorrect use:
 Failure to follow instructions.
 Improper use of the product (abusive use, out of spec,
etc.).
 Failure to adapt settings for proper function (improper
connections, wrong gearing, installation, setup, etc.).
 Overload, overheating (desoldering, melting, etc.).
 Running in inadequate conditions (damage or rust from
rain, humidity, etc.).
 Improper maintenance (presence of dirt, etc.).
 Disassembly, modification by the user (modifying
original connectors, wires, components, etc.).
 Mechanical damage due to external causes.
Team Orion Advantage ONE 406