Herunterladen Inhalt Inhalt Diese Seite drucken

Mocreo MOLINK Clipper Bedienungsanleitung Seite 2

Wireless bluetooth receiver
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 14
English
Package
1
2
No.
MOLINK Clipper Bluetooth Receiver
1
Micro USB Cable
2
3
Quick Start Guide
Over view
1. Power Button/Play/Pause/Receive a Call
2.Volume -
3.Next Song
4.Previous Song
5. Volume +
LED Indicator
- Red =Micro USB connected and charging (Red light will be turned off when
fully charged)
- Blue (slow continuously blink) = Bluetooth connected
- Red and Blue (fast continuously blink) = Waiting to be paired (paring mode)
User's Guide
3
Quantity
Name
1
1
1
6. Micro USB Port
7. 3.5mm Audio Out
8. Microphone
9. LED Indicator
-1-
Charge your Receiver
Highly recommend to charge your receiver 100% before usage. It takes approximately
2~3 hours to charge the receiver from 0% ~ 100% for the first time.
1. Using computer : connect the micro USB cable to the receiver power
connector and the standard USB port to computer 's USB port.
2. Using an electrical outlet: connect the micro USB cable to the receiver and
the standard USB port to a DC 5V adapter.
3. Indicator status:
a. RED = charging
b. BLUE = charge completed
Power ON/OFF your Receiver
1. Power ON: Press and hold the middle button
double-blinks in blue.
2. Power OFF: Press and hold the middle button
turns on in red for a whole second then off.
Use your Receiver
1. Connect the receiver to 3.5mm headphone or 3.5mm speaker
2. Turn On the receiver
3. Pair it with your Bluetooth enabled device
4. You may now begin enjoy your music!
Pair your Receiver
1. Please fully charge the Receiver before usage, the batter y is almost empty
on arrival.
2. For the first time connect, press the middle button about 5 seconds until the
indicator double-blinks in red and blue. It means receiver is ready to be
searched and be paired.
3. Enable or turn on the Bluetooth from your media device, search for the Bluetooth
named "AAR1900X". Enter pair-key "0000" if prompt. Receiver will automatically
connect to the last device you connected.
4. After connected successfully, you can start to play music on your Bluetooth
device. Enjoy the wonderful music!
for 5 seconds until the indicator
for 5 seconds until the indicator
-2-

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis