Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2. First time use
Before first time use clean all parts of the Multi-Cutter. Take care to
observe the instructions provided under paragraph 3 "Cleaning and
storage".
2.1. Chopping fruit and vegetables
Place the receptacle on a dry and stable worktop. Remove the blade
guard from the rotor. Be careful to avoid injury from the sharp blades.
For shredding sticky, lightweight ingredients fix the upward deflector to
the underside of the rotor. The upward deflector must point in an upward
direction. When filling the bowl, the blades should be aligned with the
downward deflector so that they are positioned directly above each other
to provide space for a maximum load of ingredients.
Large fruit or vegetables should be halved or quartered before processing
in the cutting apparatus so as not to block the blades.
Place the lid onto the bowl and make sure that the six edges of the rotor
correctly fit into position. Do not apply force when doing this.
The Multi-Cutter is now ready for use.
Werbung
