Warranty Terms And Conditions - Action Activejet Selected WTS-135C Betriebsanleitung Und Garantiebedingungen

GB
Metal stand fan Activejet Selected WTS-135C
POSSIBLE FAULTS:
If the device is not working, first check the voltage in the power outlet. The best way to do it is to connect some other electrical device
to the power outlet.
Possible faults, causes, and remedies.
Fault Cause
The device does not work. 1. No power supply.
2. The power button of the device
is switched off.
Poor output of the device. 1. Inefficient mode of operation set.
2. Foreign bodies brake the engine.
Abnormal sounds 1. Foreign bodies in the device.
coming from
the device.
2. Some parts of the device are not
tightened.
3. Uneven surface.

WARRANTY TERMS AND CONDITIONS:

1. Activejet fans are covered by a 24-month warranty. The warranty period starts from the date of purchase of the product as shown
on the proof of purchase.
2. The warranty covers defects caused by factory-based defective materials, improper assembly (factory), manufacturing errors.
3. The warranty does not cover defects resulting from: use contrary to the purpose and recommendations of the Instruction Manual, overloading
the device leading to the damage of the engine or mechanical transmission components, making repairs on one's own or by unauthorized
persons, modifying the construction, physical and chemical damage caused by external factors, and damage caused by the improper assembly
as well as mechanical damage.
4. The warranty does not cover parts subject to natural wear during operation: thermal fuses, electrostatic brushes, V-belts, tool holders,
accumulators, working tips of power tools.
5. The nameplate of the device should be legible. The returned/claimed product should be carefully protected against damage in transit.
As far as possible, provide the product in the original packaging.
6. In order to use the warranty, visit your point of purchase with a legible proof of purchase (receipt, invoice).
7. The warranty is handled by the sole distributor and owner of the brand: Action S.A., Zamienie, ul. Dawidowska 10, 05-500 Piaseczno, Poland.
Remedy
Check the power supply:
- is the power cord damaged? If so, please return the device
to a service centre.
- is the power cord plugged into the socket?
If not, insert the plug into the socket.
Locate the power switch and switch it to the applicable position:
ON / OFF or (0 / 1 / 2 / 3) or (0 / I / II / III)
The switch is located on the back or top of the unit.
Switch the device from mode 1 to 2, or from mode 2 to 3.
Disconnect the fan from the power outlet!
Check that there are no hairs or threads wound on the motor axis
between the housing and the propeller.
If so, take off the front cover, the propeller, and remove it.
First, disconnect the fan from the power outlet!
Remove the foreign bodies from the fan propeller cover (basket).
Turn it on again.
First disconnect the fan from the power outlet!
Check and tighten all the screws and nuts in the unit.
Turn it on again.
Place the device on a level surface.
14
Metal stand fan Activejet Selected WTS-135C
MEANING OF THE SYMBOL:
A crossed out trash bin symbol means that the device should not be disposed of in normal waste containers. It is
the responsibility of the user to hand over the used equipment to the collection points for the recycling of waste generated
from electrical and electronic equipment.
CE DECLARATION OF CONFORMITY:
The device has been manufactured in accordance with the applicable European standards, including the relevant directives and regulations
in force in the European Union for electrical products. This means that the product complies with the principles of safe use, health
and environmental protection.
15
GB