Control Panel - Panasonic WH-SDH09C3E5 Bedienungsanleitung

CONTROL PANEL

• Some functions described in this manual may not be applicable to your unit.
• Consult your nearest authorized dealer for further information.
• For normal operation, the
13
14
15
16
23
1
2
7
1
OFF/ON Button
2
Operation LED
3
Operation Mode Button
4
Quiet Operation Button
5
Indoor Unit Backup Heater Operation Button
6
System Setting Mode Buttons
7
Timer Setting Group Buttons
8
Force Heater Mode Button
9
System Pumpdown Mode Button
10
System Status Check Mode Buttons
11
Error Reset Button
12
Heat Mode OFF/ON Indicator
13
Tank Mode OFF/ON Indicator
CONTROL PANEL PREPARATION
Setting Current Day and Time
CLOCK
1. Press .
2. Press or to set current day.
SET
3. Press to confi rm.
4. Repeat steps 2 and 3 to set the current time.
4
01_F567350_OYTH0910-00_EN.indd 4 01_F567350_OYTH0910-00_EN.indd 4
ERROR
PUMPDW
RESET FORCE
, and buttons are not in use.
12 22
TIMER
HEAT
TIMER
1 2 3 4 5 6
MONTUEWEDTHU FRI SAT SUN
TANK
ON
QUIET
OFF
HEATER
FORCE
OPERATION
SETTING
TIMER
SELECT
OFF/ON
CANCEL
CLOCK
6
24 25
OUTDOOR
ACTUAL
HEATER
BOOSTER
C
SETTING
STATUS
REMOTE
C
PUMPDW
WATER OUTLET
OFF /ON
STATUS
SET MODE CHECK
SEARCH
QUIET HEATER
ERROR
RESET FORCE PUMPDW
11 4
14
Quiet Operation OFF/ON Indicator
15
Backup Heater Request OFF/ON Indicator
16
Force Heater Request OFF/ON Indicator
17
Backup Heater Actual Operation (OFF/ON) Indicator
18
Booster Heater Actual Operation (OFF/ON) Indicator
19
System Setting Mode OFF/ON Indicator
20
System Status Check Mode OFF/ON Indicator
21
System Pumpdown Mode OFF/ON Indicator
22
Timer/Clock Setting Display
23
Remote Display
24
Outdoor Ambient Temperature Display
25
Water Outlet Temperature Display
Notes:
• The current day and time need to be set when:
- The power is turned on for the fi rst time.
- After a long time has elapsed since the power was last
turned on.
• The current time that has been set will be the standard
time for all the Timer operations.
17
18
19
20
21
3
10
5
9
8
2/1/2010 11:55:13 AM 2/1/2010 11:55:13 AM
SE