Remote Control; Remote Control Buttons And Functions - Samsung HW-J450 Bedienungsanleitung

REMOTE CONTROL

REMOTE CONTROL BUTTONS AND FUNCTIONS

● Soundbar is a Samsung proprietary name.
● Operate the TV using the TV's remote control.
SOURCE
Press to select a source connected to the Soundbar.
MUTE
You can turn the volume down to 0 with the push of a button.
Press again to restore the sound to the previous volume level.
REPEAT
Press to set the REPEAT function during music playback from a USB
device.
OFF-REPEAT : Cancels Repeat Playback.
TRACK-REPEAT : Repeatedly play a track.
ALL-REPEAT : Repeatedly play all tracks.
RANDOM-REPEAT : Plays tracks in random order.
(A track that has already been played may be played again.)
Skip Forward
If there is more than one file on the device you are playing, and you press
the ] button, the next file is selected.
SOUND CONTROL (*Use the [,] buttons to adjust level.)
Press to select TREBLE, BASS, or AUDIO SYNC.Then, use the [,]
buttons to adjust the Treble, Bass volume from -6 to +6.
If the Soundbar is connected to a digital TV and the video appears out of
sync with the audio, press the SOUND CONTROL button to sync the
audio with the video. Use the [,] buttons to set the audio delay between
0 ms and 300 ms. In USB mode, TV mode, and BT mode, the Audio Sync
function may not work.
Press and hold the SOUND CONTROL button for about 5 seconds to
adjust the sound for each frequency band. 150Hz, 300Hz, 600Hz,
1.2KHz,2.5KHz, 5KHz and 10KHz are selectable and each can be adjusted
to a setting between -6 and +6.
AUTO POWER
Auto Power Link: Synchronizes the Soundbar to a connected Optical source
via the Optical jack so it turns on automatically when you turn on your TV.
(Auto Power Link : Default OFF, ON-Anynet+ / OFF-POWER LINK or
OFF-Anynet+ / ON-POWER LINK ). The Anynet+ function lets you control
the Soundbar with the remote from an Anynet+ compatible Samsung TV.
The Soundbar must be connected to the TV via an HDMI cable.
Anynet+:Press the AUTO POWER button to turn the Anynet+ function
*
on or off.
WOOFER (*Use the [,] button to adjust volume )
You can control the woofer volume.
Press the [,] button to increase or decrease the subwoofer volume.
You can select SW (-12, -6,-5,-4,-3,-2,-1,0,+1,+2,+3,+4,+5,+6).
9
REMOTE CONTROL