AIR Avionics AIR Traffic Display ATD-Serie Benutzerhandbuch Seite 47

air avionics
DEVICE INSTALLATION
ATD Benutzerhandbuch rev. 3.0 2019/05/09
MODE. Parameters
MANUAL, AUTO,
or LIGHTINGBUS.
Default: MANUAL
MANUAL INTENSI-
TY
MINIMUM
ILLUMINATION
MAXIMUM
LIGHTING BUS
POWER ON MODE:
Values ON or OFF.
Default: ON
PORT 1
DATA-PORTS
PORT 2
NO WARNINGS
selection pa-
ge. Values: NOT
CONNECTED, IN1,
or IN2. Default:
NOT CONNECTED
SWITCHES
NORTH UP selec-
tion page. Values:
NOT CONNEC-
TED, IN1, or IN2.
Default: NOT
CONNECTED
Eanbales a simula-
SIMULATOR
tor mode
A. Kon gurationsmenü
Illumination inten-
sity con guration
page for manu-
al mode: Values
from 0 (dark) to
100 (full bright).
Default: 80
Global minimum
allowed illumina-
tion intensity: Va-
lues from 0 (dark)
to 100 (full bright).
Default: 1
Global maximum
allowed illumina-
tion intensity: Va-
lues from 0 (dark)
to 100 (full bright).
Default: 100
LIGHTING BUS
source selecti-
on page. Values:
LIGHTING BUS SRC NOT CONNEC-
TED, USENS1, or
USENS2. Default:
NOT CONNECTED
LIGHTING BUS
voltage for mini-
LIGHTING BUS mum illumination
MIN intensity: Values
from 0V to 100V.
Default 0
LIGHTING BUS
voltage for maxi-
LIGHTING BUS mum illumination
MAX intensity: Values
from 0V to 100V.
Default: 12.00V
Con gures, which
kind of tra c
unit is connec-
ted to port 1:
NOT CONNEC-
TED, AT1, FLARM, ,
PowerFLARM, GAR-
MIN TIS, Default:
NOT CONNECTED
Con gures, which
kind of tra c
unit is connec-
ted to port 1:
NOT CONNEC-
TED, AT1, FLARM, ,
PowerFLARM, GAR-
MIN TIS, Default:
NOT CONNECTED
41