Turning On The Exterior (Handheld Device) Lights; Transferring Images To A Computer - Rothenberger Roscope 1000 Bedienungsanleitung

9.15 Turning on the Exterior (Handheld Device) Lights

Figure 26– Location of the Exterior Lights
Refer back to section for menu navigation architecture Section 9.4, the menu screen necessary to
change this feature is shown in Figure 27 below.
FPO
Replace with proper screen shot.
Figure 27 – Exterior (Handheld Device) Light Settings
Use the
1. Auto Mode – The External (Handheld Device) Lights turn on with the Imager LEDs (see
section 9.2 for turning the Imager LEDs on)
NOTE: the intensity of the External Lights does not change; they are either ON or OFF.
2.
On Mode – The External (Handheld Device) Lights are always in the ON position regardless
whether the Imager LEDs are in use. When the unit is on, the External Lights are on.
3.
Off Mode – The External (Handheld Device) Lights are always in the OFF position regardless
whether the Imager LEDs are in use.
Press the
10.

Transferring Images to a computer

Figure 28 – USB Connection for Transfer
buttons to change the setting.
button two times to exit into live mode.
Mini USB
ENGLISH
21