Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
If the dough is sticky, sprinkle a little fl our
over it before running it through again.
Adjust the pasta machine's rollers one
position higher and run the dough through
the machine again.
Repeat this procedure until the dough is the
desired thickness.
Cut across the dough to form sheets with a
length of about 25 cm.
To make pasta strips, insert the crank handle
into the socket on the cutting unit (5) and
run your pasta sheets slowly through the
cutting unit.
Place the pasta sheets or pasta strips on a tea
towel and allow them to dry for 1-2 hours
before cooking them.
Cleaning and maintenance
Remove the cutting unit by lifting it upwards
and sliding it sideways along the groove.
Once you have fi nished making pasta, wipe
the pasta machine clean with a piece of
kitchen roll.
NEVER use water or a damp cloth, as the
rollers will lose their smoothness, causing the
pasta dough to stick to them.
The pasta machine must not be washed.
If required, drip a few drops of cooking oil
onto the ends of the rollers and cutting
rollers.
Service centre
Note: Please quote the product model
number in connection with all inquiries.
The model number is shown on the front of
this manual and on the product rating plate.
For:
•
Complaints
•
Replacement parts
•
Returns
•
Guarantee issues
•
www.schou.com
Manufactured in P.R.C.
Manufacturer:
Schou Company A/S
Nordager 31
DK-6000 Kolding
All rights reserved. The content of this manual may not
be reproduced, either in full or in part, in any way by
electronic or mechanical means, e.g. photocopying or
publication, translated or saved in an information storage
and retrieval system without written permission from
Schou Company A/S.
GB
11
Werbung
Inhaltsverzeichnis
