Installing The Power Adapter; Maintenance Instructions - Intermec CS40 Anleitung

INSTALLING THE POWER ADAPTER

OPERATING INSTRUCTIONS
This device allows you to power your CS40 from a vehicle power
port. However, before using the vehicle power adapter, make sure
that the unit is installed as shown in
POWER ADAPTER."
CAUTION: Risk of fire. Do not replace any vehicle fuse
with a rating higher than recommended by the vehicle
manufacturer. This product is rated to draw a maximum of
2 amperes from a 12 to 24 V vehicle outlet. Ensure that the
electrical system in your vehicle can supply this product
without causing the vehicle fusing to open. Make sure the
fuse in the vehicle which protects the outlet is rated higher
than 2 amperes. Information on the vehicle fuse ratings is
typically found in the vehicle operator's manual.

MAINTENANCE INSTRUCTIONS

Disconnect before cleaning. Do not immerse. Do not
disassemble. All other servicing should be performed by qualified
service personnel.
4
Connect to vehicle
power outlet
"INSTALLING THE