Initial Start Up; Dvbt Reception - Alphatronics SLA-22 DSBAI+H Bedienungsanleitung

Remote control - Insert batteries
Example image
Change the batteries as described in the illustration: 2 „AAA" batteries are required.
Attention:
1. Keep batteries safe from children.
2. Never try to charge alkaline batteries, do not short circuit them or throw them into fire.
3. Always replace both batteries at the same time. Do not mix old and new batteries or
batteries of different types.
4. If the remote control is not used for a longer period of time, please remove the batteries to
prevent acid leakage.
Notes:
1. Do not drop or step on the remote control.
2. Protect the remote control from water and moisture.
3. Do not use the remote control for other devices at the same time.
4. If the television does not react to the signals from the remote control, please change the
batteries first!
50
ENGLISH ENGLISH
INITIAL START-UP
Before starting up, please connect your TV set to a suitable power connection. For your
convenience, we have already installed a sender list for DVB-S2 reception at the factory.
So you don't have to search for senders.
DVB-T reception
For DVB-T / C reception, we recommend that you carry out an automatic sender search,
depending on your location.
To do this, go to „Sender" with the menu button and press the OK button.
Under "Antenna type", press the button to switch to "Air".
For DVB 5V, move the slider to the right (on).
One line below the "Autom. Start search "with OK.
Set the search type to „Digital" and then start the search (scan) below.
The individual steps of the initial commissioning
When using the device for the first time, important options must be set.
Press the „OK" button on the remote control to start the initial installation.
51