Amplicom RFS01 Bedienungsanleitung Seite 30

Using the RingFlash 250 Frequency Detector
Assembling on a smoke alarm
1.
detector holder beside the smoke alarm. Position the
holder so that the smoke alarm's frequency detector is
installed as close as possible to the sound generator of
the smoke alarm.
Never install the frequency detector directly on the
smoke alarm. If you position the frequency detector
directly on the smoke alarm, the function of the smoke
alarm can no longer be guaranteed.
2. Activate the test function of your smoke alarm. (Re-
GB
fer to the operating manual supplied with the smoke
alarm.)
30