Changing The Battery In The Remote Control - Clarion OHM888VD Bedienungsanleitung

Changing the battery in the remote control

The battery needs changing when the buttons on the remote stop working or when you
have to move closer and closer to the player for the remote to work
Precautions
Dispose of used batteries properly.
Do not dispose of used batteries throwing them into fire. If you do so, they may
explode.
Do not short the positive (+) and negative (-) terminals.
Keep the battery and its holder away from young children. They may choke on the
battery while attempting to swallow or chew on it.
Procedure
Note:
The battery type must be CR2025. Do not replace with any other battery type.
1. Turn the remote up-side-down.
2. Simultaneously slide the battery latch in the direction of the arrow and pull the battery
holder out of the slot.
3. Remove the old battery.
4. Place the new lithium battery in the slot with the plus (+) side up.
5. Push the battery holder back into the slot until it locks in place.
Battery holder
Inserting the holder with the battery into the remote control
22
Battery latch
Removing the battery holder
OHM888VD / OHM1088VD / OHM1588VD
Battery holder
Battery with the plus side up