Werbung
Verfügbare Sprachen
Verfügbare Sprachen
oPERATING INSTRUCTIoNS
PoWER ADAPTER
Item No. 51 17 80
9VAC/ 18W
51 17 81
12VAC/ 24W
51 17 82
18VAC/ 36W
1.
INTENDED USE
The power adapter serves as voltage supply for low-voltage devices with matching AC sockets. It transforms
the power from mains socket (230V~ / 50Hz) into a low AC voltage. Input and output voltage are galvanically
separated. The current consumption of the connecting load must not exceed 2000mA. Only a regular mains
socket (230V~/50Hz) can be used as the voltage supply source.
Exceeding the voltage leads to an overload of the power pack; the output is irreversibly cut off when
overloading the power pack, e.g. through short circuit or excess permanent power draw. This is not covered
by the guarantee/warranty.
This product fulfils European and national requirements related to electromagnetic compatibility (EMC).
CE conformity has been verified and the relevant statements and documents have been deposited at
the manufacturer.
Unauthorised conversion and/or modification of the device are inadmissible because of safety and approval
reasons (CE). Any usage other than described above is not permitted and can damage the product and lead to
associated risks such as short-circuit, fire, electric shock, etc. Please read the operating instructions thoroughly
and keep them for further reference.
2.
SyMBoLS ExPLANATIoN
The following symbols must be observed:
An exclamation mark within an equilateral triangle indicates important information in the operating
instructions. Carefully read the whole operating instructions before operating the device,
otherwise there is risk of danger.
The device was tested and complies with the minimum requirements of the German Device
Safety Act. The GS mark is a licensed mark of the German government, which may only be
issued by an accredited product safety testing and certification agency.
The device is authorised for indoor use only.
The structure of the device complies with safety class II (double or reinforced insulation). Make
sure the insulation of the product is neither damaged nor destroyed.
This symbol indicates the device contains a short-circuit-proof safety isolating transformer.
3.
SAFETy INSTRUCTIoNS
We do not assume liability for resulting damages to property or personal injury if the
product has been abused in any way or damaged by improper use or failure to observe
these operating instructions. The warranty/ guarantee will then expire!
The icon with exclamation mark indicates important information in the operating
instructions. Carefully read the whole operating instructions before operating the device,
otherwise there is risk of danger.
Personal safety
•
The product is not a toy and should be kept out of reach of children!
•
Wet or moist hands must not be in contact with the power supply. Otherwise, there is rise of
electrocution.
Product safety
•
When used in conjunction with other devices, observe the operating instructions and safety
notices of connected devices.
•
The product must not be subjected to heavy mechanical stress.
•
The product must not be exposed it to extreme temperatures, direct sunlight, intense vibration,
or dampness.
•
The power adapter must always be inserted without force. Make sure that the plug is tightly
connected to the mains socket.
•
The power adapter must be disconnected by using the grip areas. Never pull the output cable
to withdraw the power adapter from mains socket.
•
If there is reason to believe that safe operation is no longer possible, put the device out of
operation and secure it against unintended operation. Safe operation is no longer possible if:
-
the device shows visible damages,
-
the device no longer works,
-
the device was stored under unfavourable conditions for a long period of time and
-
the device was subject to considerable transport stress.
Miscellaneous
•
Repair works must only be carried out by a specialist/ specialist workshop.
•
If you have queries about handling the device, that are not answered in this operating
instruction, our technical support is available under the following address and telephone
number: Voltcraft
4.
oPERATIoN
Make sure to observe the magnitude of the output voltage. Excessive voltage input leads
to the destruction of the connected electrical appliance. Should you not be certain, contact
Version 04/09
a specialist.
Make sure the power consumption of the connected electrical load is lower than the
maximum power output for the power adapter. otherwise, the power adapter will be
overloaded.
1.
Switch off the to be connected load before connecting it to the power adapter.
2.
Connect the low-voltage plug of the power adapter to the power receptacle of the connecting load.
Connect the power adapter to a mains socket. The red LED will light up to indicate the power adapter is
in operation.
To remove the connecting load:
1.
Switch off the connecting load first.
2.
Remove the power adapter from the mains socket.
3.
Detach the low voltage plug from the connecting load.
5.
MAINTENANCE
Check the product and the power cable for damage before each use. When you notice damage do not use this
product any more. Disconnect it from the mains voltage. Take this product to a repair shop or dispose of it in
an environmentally friendly manner.
When cleaning, the power adapter must be disconnected from mains socket.
Only use dry and soft cloth to clear the housing of the power adapter. Do not use abrasive or solvents!
6.
TRoUBLESHooTING
In purchasing the power adapter, you have acquired a reliable, state-of-the-art product. Problems and
malfunctions may, however, still arise.
For this reason, the following is a description of how you can eliminate possible malfunctions yourself.
observe the safety instructions in all cases.
Error
The power indicator does
not light up.
Repairs other than those just described should only be performed by an authorised
specialist.
7.
DISPoSAL
In order to preserve, protect and improve the quality of environment, protect human health and
utilise natural resources prudently and rationally, the user should return unserviceable product to
relevant facilities in accordance with statutory regulations.
The crossed-out wheeled bin indicates the product needs to be disposed separately and not as
municipal waste.
8.
TECHNICAL DATA
Operating voltage:
Output voltage and current:
Dimensions of the low-voltage plug:
Operation temperature:
Operation humidity:
Dimensions (L x W x D):
Weight:
These operating instructions are published by Voltcraft
Lindenweg 15, D-92242 Hirschau/ Germany, Phone +49 180 586 582 7.
The operating instructions reflect the current technical specifications at time of print.
We reserve the right to change the technical or physical specifications.
© Copyright 2009 by Voltcraft
®
, 92242 Hirschau, Lindenweg 15, Germany, phone 0180 / 586 582 7.
Possible solution
Is mains voltage available?
•
Check the fuse for the mains socket.
•
Check whether the power adapter is correctly plugged to the mains
socket.
Is the power adapter overload?
•
Remove the connected load and check the technical data.
230V~/ 50Hz
Item no. 51 17 80
Item no. 51 17 81
Item no. 51 17 82
Outer ø
Inner ø
0ºC to +40ºC
40 to 90% Relative Humidity
Item no. 51 17 80
Item no. 51 17 81
Item no. 51 17 82
Item no. 51 17 80
Item no. 51 17 81
Item no. 51 17 82
®
,
®
.
9V~ 2000mA
12V~ 2000mA
18V~ 2000mA
5.5mm
2.1mm
Approx. 75 x 58 x 87 mm
Approx. 110 x 84 x 67 mm
Approx. 110 x 84 x 67 mm
Approx. 0.45kg
Approx. 1.1kg
Approx. 1.1kg
*02_04/09_01-HW
Werbung
