Handling Cassette Tapes And Cautions; Before Recording And Playing Cassette Tapes - Denon DRR-201SA Bedienungsanleitung

6

HANDLING CASSETTE TAPES AND CAUTIONS

Cautions on Handling Cassette Tapes
• C-120 and C-150 tapes
C-120 and C-150 cassette tapes use extremely thin tape
that can easily get caught in the capstan or pinch roller.
Do not use such cassette tapes.
• Slack in the tape
The tape may get caught on the capstan and be
damaged if the tape is slack when the cassette is
loaded. Use a pencil, etc., to take up any slack in the
tape before loading the cassette.
Cautions on Storing Cassette Tapes
• Do not place cassette tapes in the following places:
1. Hot or humid places
2. Dusty places
3. Places exposed to direct sunlight
4. Places exposed to magnetic forces (near TVs,
speakers, etc.)
• Store cassette tapes in cases with stoppers to prevent
the tape from becoming slack.
Downloaded from www.Manualslib.com
Accidental Erasure Prevention Tabs
• Cassette tapes are equipped with accidental erasure
prevention tabs. To protect recordings from being
erased accidentally, use a screwdriver, etc., to press on
the tabs and break them off.
• To record on a cassette tape whose tabs have been
broken off, cover the holes with cellophane tape, etc.
Accidental erasure protection
tab for side B
Accidental erasure protection
tab for side A
A
Side A
Cleaning the Heads
A commercially available head cleaning cassette (wet
type) is required to clean the heads (recording/playback
and erasing) on this product.
• If the heads are dirty, sound cannot be recorded or
played with good quality.
• To take full advantage of this product's performance and
to achieve good sound quality, clean the heads
periodically after approximately 10 hours of use.
• We recommend using a wet type commercially
available head cleaning cassette that also cleans the
pinch roller and capstan.
Degaussing the Heads
• The heads become magnetized after extended use or
after being exposed to magnetized objects. This results
in noise or a loss of high frequencies.
• Use a commercially available cassette type head
degausser to demagnetize the heads.
NOTE:
• Set the amplifier's volume to the minimum when
cleaning and degaussing the heads.
manuals search engine
7

BEFORE RECORDING AND PLAYING CASSETTE TAPES

(1) Loading and Unloading Cassette Tapes
z
Loading
3
1 2
DOLBY REVERSE
5
ON / STANDBY NR / RESET CD SRS
REC LEVEL / 0 1
8 9
L 6 7
dB -60 -40 -30 -20 -12 -6 -2 0
R
3 DOLBY NR B
STEREO CASSETTE TAPE DECK DRR-201SA
1 2,4
ON / STANDBY
1
Turn on the power.
5
In the stop mode, press the cassette
2
holder open/close button.
• The cassette holder opens.
Set the cassette tape in the cassette tray with
3
the side on which the tape is exposed facing the
inside.
5
Close the cassette holder.
4
• The "TAPE" indicator on the display
lights.
NOTES:
• If a foreign object is caught in the cassette tray during closing, simply press the OPEN/CLOSE button again and
the tray will open.
• Do not press the cassette tray in by hand when the power is off. Doing so will damage it.
• Do not place foreign objects in the cassette tray. Doing so will damage it.
(2) Auto Tape Select Mechanism
This set is equipped with an auto tape selector function
that uses the detection holes in the cassette tape to
detect the type of tape and automatically set the
recording bias equalizer accordingly.
• Do not use ferrichrome tapes.
• Use metal tapes equipped with detection holes.
x
Unloading
2
4 REC
5
/ REC MUTE ON / STANDBY
L
dB -60 -40 -30 -20 -12 -6 -2 0
R
+
3 DOLBY NR B
1,3
In the stop mode, press the cassette
1
holder open/close button.
• The cassette holder opens.
2
Remove the cassette tape.
Close the cassette holder.
3
• The "TAPE" indicator on the display
turns off.
Accidental erasure Accidental erasure
protection tabs protection tabs
Direction
Direction
holes
holes
ENGLISH
1 2
DOLBY REVERSE 4 REC
NR / RESET CD SRS / REC MUTE
REC LEVEL / 0 1
8 9
6 7
+
STEREO CASSETTE TAPE DECK DRR-201SA
5
5
7