Specifications - Monacor LEDS-3PRO/RGB Bedienungsanleitung

4.2 Selecting the control programme
The control programmes with fixed running speed
are selected with the buttons
No. Programmes with fixed speed
automatic change
1
of programmes 2 – 10
2 rainbow running light
3
yellow running light
4 purple running light
5 cyan running light
6 gradual transition between the colours
7
change between the colours
8 white running light
9 red running light
10 blue running light
11 green running light
automatic change
12
of programmes 8 – 11
8 Buttons to select the control programmes with
fixed running speed [The buttons FADE and
SMOOTH (12) have no function in this case.]
9 Buttons for constant lighting in one colour. The
lighting colour corresponds to the colour of the
button.
10 Buttons ON and OFF to switch the LEDs on and
off
11 Buttons FLASH and STROBE to select the con-
trol programmes with variable running speed
button FLASH: next programme
button STROBE: previous programme
12 Buttons FADE and SMOOTH to adjust the run-
ning speed (8 steps) for the programmes which
are selected with the buttons FLASH and
STROBE (11)
button FADE: faster
button SMOOTH: slower
LEDS-3PRO/RGB
The control programmes with adjustable running
speed can be selected with the buttons FLASH and
STROBE (11). The speed can be changed with the
and (8):
buttons FADE and SMOOTH (12) [8 steps].
No. Programmes with variable speed
1 switching between the colours
2 white flashing
3
coloured running light, 1 LED per colour
4 coloured running light, 2 LEDs per colour
5 coloured running light, 4 LEDs per colour
6 coloured running light, 8 LEDs per colour
automatic change
7
of programmes 3 – 6
8 1 white LED runs through changing colour
9 2 white LEDs run through changing colour
10 3 white LEDs run through changing colour
11 4 white LEDs run through changing colour
automatic change
12
of programmes 8 – 11
13 white running light creating a chain
14 red running light creating a chain
15 blue running light creating a chain
16
green running light creating a chain
17 purple running light creating a chain
18 yellow running light creating a chain
automatic change
19
of programmes 13 – 18
8
9
®
MONACOR INTERNATIONAL GmbH & Co. KG • Zum Falsch 36 • 28307 Bremen • Germany
Copyright © by MONACOR INTERNATIONAL. All rights reserved.
Order No. 38.5520
OFF ON
R G B W
FLASH
STROBE
FADE
SMOOTH
LEDS-3PRO/RGB
When selecting a control programme, the speed is
adjusted to maximum at the same time.
When switching between the programmes with
adjustable speed and fixed speed, programme
No. 1 is always switched on first.
4.3 Constant lighting in one colour
For constant lighting of all LEDs in one colour,
press the corresponding colour button (9).
4.4 Switching the LEDs on and off
The LEDs can be switched off with the button OFF
(10) and switched on again with the button ON.
However, the controller remains switched on.

5 Specifications

Type and number of LEDs: . . 72 RGB LEDs
Beam angle: . . . . . . . . . . . . . 120°
Power supply: . . . . . . . . . . . . 5 V , 2 A
Ambient temperature: . . . . . . 0 – 40 °C
Dimensions
LED strip: . . . . . . . . . . . . . 14 × 4 × 3000 mm
controller: . . . . . . . . . . . . . 46 × 24 × 71 mm
remote control: . . . . . . . . . 54 × 8 × 86 mm
Subject to technical modifications.
10
11
12
A-1214.99.02.03.2012