Maintenance Instructions - Desoutter 2DMX6-620 Wartungsanleitung Bedienungsanleitung

2DMX6
fl
o.ou-
l.llnn.d
STATEMENT OF USE
This
mo1er
is designed to be incorporated inll> a fixed or moving
machne.
It can be connecwd for eilher right or left rotation or swirdlable
berw-t Ille IWO
with
suitable valving.
The
motor
shouk! be mounted by the flange or threaded nose only.
The risl< ol lhe
motors
being the source of ignition ol a potantialty
explosive atmosphere is exlramely small.
The
user
is responsible for assessing the risks associated with the
whole madtine into which the moll>r is
II>
be inco<porated.
GENERAL
Recommended inlel hose
r -
3m
Lubrication
Correct k.tbricalion is vital for the maximum performance of the tool
and an airline lubricator should be fined in the system down line of
Iha fillllf. Use ISO VG 15.
158733 = Molycota PG75 273283 = BP FGOOEP
208893 •
Rocol M204G
27652 = ISO VG 15
273273 = BP 056t8
DATA
Maximum air pressure Pmax
=
6.3
bar
Minimum air pressure Pmin •
2
bar
Sound Pre....., l.8'181 (dBa) ·• 73 re. CAGl-PNEUROP Test coda
V1bralion level (mlsec')
• <2.5 re. ISO 8662
Weight
Motor type/RPM kg
20M6.S, 45 0.88
2DM6-M, 90, 290 0.78
20~.
620, 980, t650 0.78
2011.16-2700, 4200, 16000 0.60
2DM6-9000 0.80
Printed
in England
@)
ACCESSORIES
A range of accessories
are
available and suitable itams should
be
selected from the Desouner calalogue.
MAINTENANCE INSTRUCTIONS
1. Servicing should be carried oul al inlervals of 1000 hours' use.
2. All to""e figures ± 10%.
3. Replace as necessary all 'O' rings, bsarings and rotor blades,
see seNice kit.
4.
~Indicates
direclion of dismanUing.
5. When disposing of components, lubricants, elc, ensure thal the
relevant safety procedures are carried out
END CAP TO BE PRESSED INTO
BEARING HOUSING IN DIRECTION OF
ARROW 'A' TO DIMENSION SHOWN
THIS DIMENSION TO APPLY
AFTER BEARING IS PRESSED
ONTO ROTOR
3 of t4
-11-0.3
· - 1
0.2
To Dismantle: refer to main iJJustrarton
20M6-i..
/
~
To Assemble: Motor complete, refer 10 main illustration
PART No411B73
ISSUE
112.96