Lagrange 60901-Serie Bedienungsanweisung Seite 53

Dismantling:
Unscrew the glass bowl's tightening ring by turning it anti-clockwise
*
(bowl turned upside down) and remove the
the seal so they can be cleaned.
Once the glass bowl has been cleaned, place the bowl upside down
*
and replace the blade and seal assembly. Refit the tightening ring
and screw clockwise until tight.
Tip: For a pre-cleaning or fast cleaning between
put about 1 liter of hot water in the bowl and run the blender for
seconds on intermediate speed.
30
-blade assembly and
6
preparations,
2
53
E N G