Camera Controls; Turning It On For The First Time - Lamax W9.1 Benutzerhandbuch

3. CAMERA CONTROLS

Turn on / off
Start / stop the recording
or take a photo
Switch quickly between
photo / video mode
Select the mode
Settings
View files
Switch between displays
Turn WiFi on / off

4. TURNING IT ON FOR THE FIRST TIME

A
INSERT THE MICROSD CARD INTO THE CAMERA AS SHOWN (CONNECTORS TOWARDS
A
THE LENS)
›
Only insert the card when the camera is turned off and not connected to your computer.
›
Format the card directly in the camera the first time you use it.
›
We recommend memory cards with a higher write speed (UHS Speed Class -U3 and higher) and a maxi-
mum capacity of 128 GB.
Note: Use only micro SDHC or SDXC cards from reputable manufacturers. With generic third-party cards, there
is no guarantee that the data storage will work properly.
CONNECT THE CAMERA TO A POWER SOURCE
B
›
You can charge the camera by either connecting it to your computer or using an optional AC adapter.
›
It takes approximately 4.5 hours to charge the battery from 0 to 100%. When charged, the charge indi-
cator turns off.
Note: Charging the battery from 0 to 80% takes 2.5 hours.
Hold down the POWER button or swipe down and press the POWER icon
Press the REC button
Swipe to the side or press the MODE button
Touch the icon or swipe up and select the desired mode
Touch the icon
Touch the icon
Hold the MODE button
Press the POWER button or touch the WiFi icon, which you can find by
touching the icon
B
4