Samsung UE75ES9000 Benutzerhandbuch Seite 12

4
5
6
7
8
9
10
11
If You Want to Reset This Feature...
Menu → System →Setup
Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is "0-0-0-0". If you want to change the PIN number, use
the Change PIN function.
You should do Setup (Menu → System) again at home although you did in shop.
✎ If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to "0-0-0-0":
MUTE
[UE9000-ZG]BN68-04584A-01L04.indb 12
Downloaded from www.Manualslib.com
Software Upgrade: Upgrading Select Next to upgrade TV software. Your TV will automatically upgrade, if your TV need a software
the software to latest version upgrade. If you want to upgrade later, select the Skip. For more information, refer to Software
Upgrade (Preference Features → Support Menu) in the e-Manual.
✎ To upgrade later, select
Skip. ✎
Select Country. Select the appropriate country.
(Depending on the country)
✎
Auto Tuning (1): Selecting how Let's find and store channels on your TV. Do you need to search for channels?
you watch your TV
• Yes, I need to.: All the channels available will be found and stored on your TV.
• No, I don't need to.: My set-top box provides all the channels that are available, so I don't
Auto Tuning (2): Select the channel source to memorise. When setting the aerial source to Cable, a step appears
Selecting a search options and allowing you to assign numerical values (channel frequencies) to the channels. For more information,
refer to Auto Tuning (Channel Menu → Memorizing Channels) in the e-Manual.
Region Selection (Depending
on the country)
✎
✎
✎
Clock: Setting the Clock Mode • Auto: Set the current time automatically.
• Manual: Allows you to manually set the current date and time.
✎
Voice and motion control:
Setting the Voice and motion
control function.
Setup Complete Select Close to finish.
✎
Set the Universal Remote 1. Turn on the
2. Select Yes to start the Universal Remote Setup.
✎
→ → → →
8 2 4 POWER (on).
manuals search engine
This may take some time, depending on network status.
After selecting the country in the Country menu, some models may proceed with an
additional option to setup the pin number.
need to search for channels.
When Air or Cable is selected first: After all Air or Cable channels are stored, the step for
storing Satellite channels is displayed.
When Satellite is selected first: After all Satellite channels are stored, the step for storing
Air or Cable channels is displayed.
Select Stop at any time to interrupt the memorization process.
You can turn the Voice and motion control function On or Off. Select Off or On, and then
select Next. For more detailed information, refer to "SMART Interaction" (p.14)
The completed settings are displayed.
POWER button on the bottom of the IR Blaster, and then press the
button.
For more detailed information about the Universal Remote Setup, refer to "Setting up the
Universal Remote Control" section in the manual (page 9).
English - 12
PAIRING
2012-09-05 2:04:26