Samsung UE75ES9000 Benutzerhandbuch Seite 11

Installing batteries (Battery size: AAA)
Match the polarity of the batteries to the symbols in the battery compartment.
✎ NOTE
• Install the batteries so that the polarity of the batteries (+/-) matches the illustration in the battery compartment.
• Use the remote control within 23 feet of the TV.
• Bright light may affect the performance of the remote control. Avoid using when near special fluorescent lights or neon signs.
• The colour and shape may vary depending on the model.
✎ Plug the power cord into a wall outlet only after you have made all other connections.
✎ If you are connecting your TV to a cable or satellite box using HDMI, Component, or Composite connections, you do not need to connect the
ANT IN jack to an aerial or a cable connection.
✎
Using two-way radio mobile and portable units or amateur radio or AM radio near your TV may cause the TV to malfunction.
✎
Use caution when you move or swivel the TV if the aerial cable is tightly connected. You could break the aerial jack off the TV.
When you turn the TV on for the first time, a sequence of prompts and screens will assist you in configuring basic settings. To begin Setup, press the
button on your remote.
P
✎ Setup is available only when the input source is set to TV. See "Changing the Input Source" (p. 14).
✎ To return to the previous step in the Setup sequence, Select Previous.
✎ Before you begin, make sure you have connected the TV to an aerial or a cable connection and that the TV is plugged in.
✎ To start the Setup select Start.
1
2
3
[UE9000-ZG]BN68-04584A-01L04.indb 11
Downloaded from www.Manualslib.com
VHF/UHF Aerial Satellite Cable
or
Menu Language: Select a menu language you want using your remote, and then select Next. The TV will be
Select a Language. displayed a menu using the selected language since next step.
Use Mode: Select the Home Select Home Use using your remote, and then select Next.
Use Mode.
Store Demo mode is for retail environments.
Network Settings: Configure To set up your network connection, select Next using your remote. If you do not know your
network settings network set up information or want to set to it later, select Skip. For more detailed information,
refer to "Setting up the Wired or Wireless Network" in the e-Manual for set up requirements and
✎
To connect later, select
instructions, and the Network Connection section of this manual (p. 18). You can set up the
Skip.
network connection later using the Network menu.
manuals search engine
Connecting to an Aerial
Setup (Initial Setup)
English - 11
2012-09-05 2:04:26