SUNBEAMsystem Moonray Serie Bedienungsanleitung Seite 7

EN DE FI NL SV
External accessories
Remote Temperature Sensor might be used for installations where it is not possible to place the controller
in a region where the temperature is the same as the ambient temperature around the batteries. It will
improve the sensing accuracy.
Optional accessories, the Remote Display or Bluetooth Dongle should be connected via the included
network cable. If the included cable (2m) is to short any straight network cable (cat6) will be able to
replace it.
Connections overview
If set to autosense 12 or 24V battery system (default setting). The controller should be connected
to the battery before any other connections at least once. Later connect PV and finally any optional
accessories to the Load/timer terminal.
Power on by connecting the fuse in between battery and controller. Continue reading, including chapter
4 which covers charge parameter settings for advanced battery types.
WWW.SUNBEAMSYSTEM.COM 5