Werbung
ENGLISH
Clearances & Installation
BulB
Equipment required
Timber/Wood: pencil, short philips head screw driver, drill
and pilot drill bit.
Concrete/Stone: pencil, short philips head screw driver, hammer,
masonry drill and masonry bit.
1. Confirm you have received all necessary parts as illustrated. For
installing against a timber/wood surface you will need part A. For
installations against a concrete/stone surface you will need part B;
2. Position the fireplace in accordance to the compulsory minimum
clearances outlined in the Instruction Manual;
3. Remove the 4 (four) rubber plugs from the tabs on the base;
4. Use the 4 (four) tab holes as a template for drill hole centres;
5a. Move fireplace and pilot drill 4 (four) holes for timber/wood screws
provided;
5b. Move fireplace and pilot drill 4 (four) holes for masonry anchors
provided;
6. Re-position fireplace and fix screws through tabs in base plate to
floor.
www.ecosmartfire.com
A x 4
B x 4
1.
3.
5a.
6a.
2.
4.
5b.
6b.
Werbung
