Werbung
ENGLISH
Clearances & Installation
dISH
Equipment required: flyscreen offcut, or fine mesh, small river pebbles
or ornamental stones, sand or decorative soil
1. Position the fireplace in accordance to the compulsory minimum
clearances outlined in the Instruction Manual;
NOTE: Once filled, fireplace will be extremely heavy and
difficult to move!
2. Ensure drain hole is kept clear using a small offcut of flyscreen or
fine mesh, place a layer of pebbles in dish to allow Burner to sit flush
with top rim of DISH fireplace;
3. Make sure Burner sits in the centre of the DISH fireplace;
4. Use a spirit level to ensure Burner top is horizontal and not leaning
or tilted;
5. Add remaining decorative pebbles, stones and sand as desired.
lantErn
1. Position the fireplace in accordance with the compulsory minimum
clearances.
2. Open the Lantern door and gently fit the burner into position.
www.ecosmartfire.com
1.
3.
5.
2.
2.
4.
6.
Werbung
