Master/Slave Mode - IBIZA LIGHT LZR430RGB Bedienungsanleitung

Mode/Function: Set the operating mode of laser.
Confirmation: Confirms all settings or changes of LED control panel.
UP/DOWN: Changes the operating mode, parameter or DMX address.
Stand Alone Preprogrammed Laser Show
 Press FUNC to enter MODE OPTION.
 Press UP or DOWN to select your favorite Stand Alone mode as above.
 Press ENTER to confirm the setting.
The laser is working in stand alone. Each time when you turn on your laser, you will
have this confirmed laser show.
In the MODE OPTION setting, the stand alone laser show that you are going to choose, is flashing. Press UP or DOWN
to change stand alone laser show, you will have 21 different stand alone preprogrammed laser show.

MASTER/SLAVE MODE

Press FUNC to enter MODE OPTION

Press the UP/DOWN buttons until the LED panel shows SLAV

Press ENTER to confirm the setting.

The laser is working in "SLAVE MODE". Connect MASTER laser and SLAVE lasers with DMX cable, the SLAVE lasers do
what exactly MASTER laser does.
DMX MODE
Press FUNC to enter MODE OPTION

Press the UP/DOWN buttons until the LED panel shows D001.

Press ENTER to confirm the setting.

The laser is working in "DMX MODE". Change the DMX address of the laser via the
UP/DOWN buttons.
Remote Control (Optional)
1. AUTO Show
2. MUSIC show
3. Laser ON/OFF
4. Color
5. Changing Pattern
6. Fixed pattern (from 1 to 128)
7. Pattern repetition
©Copyright Lotronic 2017 LZR motor laser series
1 2
FUNC UP DOWN ENTER
1 2
FUNC UP DOWN ENTER
3
3
4