Maintenance And Warranty; Storage; Repairs; Calibration - SoFlow Flowpad 25.2 V Originalbetriebsanleitung

5. Maintenance and Warranty

5.1 Storage

Please store it in a dry place. If left unused, recharge the battery every two months to maintain the longevity of the battery.

5.2. Repairs

Flowpads can only be repaired with original spare parts from the licence supplier or seller. Opening up, disassembling or modifying the
vehicle with non licensedor non original parts will invalidate the warranty.

5.3 Calibration

The gyrosensor of your Flowpad occasionally needs to be calibrated. The following situations are indicative of that:

The Flowpad reacts faster on one side than on the other

You have to tilt forward or backwards in order for your Flowpad to stand still

The stability indicator with the ring in the middle is glowing red when you stand on your Flowpad

The steering does not react or reacts differently than previously experienced
In order to calibrate your Flowpad you must first turn it off and put it in a horizontal position. The use of a mechanic's level is
recommended in order to ensure the horizontal position of your device. Turn your Flowpad on and keep the on-button pressed until
the device makes a sound and the front lights flash 5 times. Then you can turn the Flowpad off and on again. The gyrosensor is now
calibrated. Repeat this process in case the problem reoccurs. You can find a video on how to calibrate your Flowpad on
www.youtube.com.
copyright by www.so-flow.com 15
Flowpad Bedienungsanleitung