Clearaudio smart phono V2 Bedienungsanleitung Seite 4

User manual / Bedienungsanleitung
- Attention –
smart phono V2 / smart phono headphone V2
Never cover or put anything on top of the as this
could lead to overheating of electronic parts.
If the unit is not in use for some time, please switch it off using the power switch on top of the
device. Disconnect the device completely from the power supply by removing the mains plug from
the socket.
Pic. 4: On/Off button
- Notice –
smart phono V2 / smart phono H V2
If you are using the with a two-pin mains plug, you may notice
that inserting the plug into the mains socket one way round gives a slightly better sound than the
other way. Experiment to identify which is the optimum position.
Phonostages provide a very high level of amplification, to address the fact that the electrical signal
generated by a phono cartridge is extremely low. As a result, phonostages are extremely sensitive,
which leads to the potential problem that high-frequency interference may also be amplified to
a point at which it becomes noticeable. Unfortunately it is not possible to completely protect the
sensitive phonostage circuitry from this interference without degrading its high fidelity performance.
Therefore care must be taken to position the phonostage away from sources of high frequency
interferences such as mobile phones, modems and powerline communication systems (PLC) in
which data is sent over the mains power network.
4 © clearaudio electronic GmbH, 2019-04