4) Place the Microfiber Cloth Pad onto the mop head.
Note: Microfiber Cloth is washable.
5) Fasten the Microfiber Cloth Pad by pulling the cord while pressing on Toggle.
6) When using steam mop on carpets, place the mop head (with microfiber cloth in place)
over the Carpet Glider.
NOTE: Do not operate without either Microfiber Cloth in place.
7) To remove the Water tank push it up and detach from the body as shown below.
8) Please pour two measuring cups of water into the Water tank (The MAX is 580ml/20oz,
do not try to over fill)
9) To remove the Water Filter push it up and detach from the body.
10) Twist the Quick Release Cord Wrap clockwise to unwrap the Power Cord completely and
plug into a grounded outlet.