Motorola RLN6257 Bedienungsanleitung Seite 5

Step 5. Centerpunch and drill a 0.157" diameter hole at each location.
Step 6. Mount the trunnion bracket using the supplied screws.
Step 7. Remount the speaker into the trunnion bracket and retighten the
two wing screws.
Wall Mount Bracket Installation Procedure (Refer to Figure 1.)
10-16 x 5/8''
Dashboard
Self-Tapping
Screw
Firewall
Console or Floor
Dashboard
0.157'' (3.99mm)
Diameter
Trunnion Bracket Firewall
Mounting Detail
Step 1. Remove the wall mount bracket from its taped position on the
hanger bracket.
Step 2. Remove the trunnion bracket and trunnion wing screws, and
retain for future use.
Step 3. Remove the two paper retainers and screws from the wall mount
bracket.
Step 4. Determine the location for the installation.
Trunnion Bracket
Hanger
Bracket
Trunnion
Bracket
or
10-16 x 5/8''
Self-Tapping
Screw
Figure 1. Physical Installation Details
Vehicle
Window
To
Firewall
Mounting
Window Mounting
Detail
NOTE:
The rear cover of the speaker and the
circuit board must be temporarily
removed to mount the hanger bracket.
Hanger
Bracket
Wall Mounting
Bracket
0.101'' (2.56mm)
Diameter
6-20 x 1/2''
Self-Tapping
Screw
Wall Mounting
Bracket Detail
MAEPF-26870-O
3