FOREVER BUMPAIR BS-700 Handbuch Seite 5

After the battery fully charges, the LED will turn off. When the loudspeaker is fully
charged, disconnect it from the power source.
The loudspeaker has an in-built battery – to prevent damage to the set, do not remo-
ve the battery on your own.
Activation
Press and hold ON/OFF button until the LED lights up
Deactivation
Press and hold ON/OFF button until the LED goes out
Available operating modes
- Bluetooth
- Audio linear input (audio in)
- Playing music from a microSD card
- TWS function
Loudspeaker pairing
1. Press and hold ON/OFF button until the LED starts flashing
2. Activate Bluetooth connectivity in the device, which you want to connect with the
loudspeaker.
3. Search for a new device. The loudspeaker will be visible as "BS-700" on the list.
4. Connect with the loudspeaker. Certain devices require entering code "0000"
5. Correct connection of the loudspeaker will be confirmed with a voice message.
If you connect Audio-in cable, Bluetooth connectivity will be interrupted.
Change of mode
To switch Bluetooth / SD Card / audio cable mode, press button (4)
TWS CONNECTION
1. Activate two loudspeakers
2. Press and hold Play / Pause button on one of the loudspeakers for 2 seconds until
you hear audio signal.
3. Release the play / pause button. Connection of loudspeakers may take several
seconds.
4.Activate Bluetooth function in the device, select "BS-700" loudspeaker name from
the list and pair the devices.
Press Play button twice to deactivate TWS function.
EN EN
PL
BG
CZ
DE
EE
ES
FR
GR
HU
IT
LT
LV
NL
RO
RU
SK
5